The System Viewer setup dialog can be launched from the Analysis menu's Setup for Analysis Execution dialog by selecting SystemViewer (in Analyses Available frame) and then choosing the [Edit Analysis Parameters] command.
Note: See System Viewer Introduction for relevant details regarding use of this application.
Navigate with Existing
Views - selecting [Go]
command opens schematic Navigator to select a view perspective for previously
generated schematic.
Note: If Schematic has not been generated for the model, dialog
displays warning message indicating there are No
Existing Views.
Generate a Set of Views - allows user to generate a new set of schematic views based on:
Defined component family/type selections-
Select the general component families to include from the check boxes and then highlight the specific component types in the list box window.
Displayed components-
Select Check to Include Displayed Components check box to have generated schematic include all components that have the Display property for Local Name set "ON".
Flagged components-
Select Check to Include Flagged Components check box to have generated schematic include any components that have a flagged status, which can result from running some DEW applications.
X/Y Scale [__]-
Allows
user to input scaling factors used to adjust the horizontal and vertical
spacing of the components in the (orthogonal) schematic views.
Note:
Skeletal view of schematic remains in geographic drawing scale. Default
values of X:[3], Y:[2] are recommended for generating most
schematics.
Log-
When
applicable, selection generates a spreadsheet log (i.e. debug.csv) that
provides detailed breakdown of generated schematic components.
Note:
Log sheet is intended to assist debugging schematic generations that did
not produce expected results.
|
|