Display Report - running application generates the Secondary Fault Analysis Report for the selected location.
Use Nominal Volts as Pre-Fault Volts - nominal voltage of location (where distribution transformer will be attached) is applied as pre-fault voltage.
Primary Location to be Picked - indicates that user will select a primary location to attach a distribution transformer for the secondary fault analysis.
[__] Single Ph - user selects Line-to-Ground service voltage that will be obtained at the secondary side of single-phase distribution transformer.
[__] WYE Sec - user selects Line-to-Ground service voltage that will be obtained at the secondary side of distribution transformer that has (closed or open) WYE secondary.
[__] DELTA Sec - user selects Line-to-Ground service voltage that will be obtained at the secondary side of distribution transformer that has (closed or open) DELTA secondary.
|
General functionality for common windows commands and features found on dialogs include: Display Window - When applicable, this read-only window typically appears just above the command button set and displays descriptive messages related to the last menu selection. [OK] - Command button to accept current selections as user input and exit dialog. [Cancel] - Command button that exits dialog and does not incorporate any changes made since last opened. [Reset] - Command button that immediately returns all items on the menu to their default settings. [Help] - Command button that launches Help application. [About] - Command button that displays version, copyright and proprietary information. |
|
|
|
|