At Distributech 2018 … Learn about Pepco Holding Incorporated’s use of EDD’s Integrated System Model technology for DER analysis and Big Data

The DEW/ISM software from Electrical Distribution Design represents a new paradigm in modeling and analysis for electric utilities.  Come listen to Steve Steffel, Manager of Regional Capacity Planning – Distributed Energy Resources, speak on Tuesday, January 23rd at 3 pm in the session:  Real World Experiences Streamlining DER Interconnection Studies.  Steve’s presentation, entitled “Big Data Analytics at Pepco Holdings: Integrated System Model,” will describe the implementation of DEW/ISM that includes a 1.9M meter Integrated System Model of PHI’s primary and secondary system.  The ISM includes over 730 MW’s of DER and an 8760 hourly load model for all 1.9M customers with net-metered accounts separated into native load and DER output.  The ISM provides a platform for automating engineering analysis and maintaining model data quality that is critical for managing the modern smart grid.

EDD’s Chief Technical Officer, Dr. Robert Broadwater, will be on hand to answer questions and to meet with interested parties to discuss the DEW/ISM technology.

Visit our website <www.edd-us.com> or contact us <solutions@edd-us.com> for more information on EDD or the DEW/ISM software.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

EDD presents at WPI Seventh Annual Energy Symposium: Engineering Impacts from Energy Policy

EDD’s Dr. Jason Bank (Principal Engineer) and James Tarpey (Executive Consultant) will be presenting at the September 28th WPI Energy Symposium.  Their talk will be part of the session:  “State Policies Driving Engineering Changes.”

EDD provides the DEW/ISM advanced network modeling and analysis software product to electric utility clients.  The presentation will center on specific client use cases of DEW/ISM where regulatory policy changes are causing utilities to reinvent how engineers model, analyze, and design distribution systems to integrate increasing levels of Distributed Energy Resources (DER).

DEW/ISM has significant market advantages over traditional engineering software for building and maintaining large detailed Integrated System Models of electric distribution and/or transmission systems.  With DEW/ISM engineers can connect and make use of measurements from AMI, SCADA, PV, storage and other smart devices.  Automation of engineering analysis with DEW/ISM reduces the cost and time required for DER interconnection requests, and provides for more consistent results.

Click here to view the presentation.

Visit our website <www.edd-us.com> or contact us <solutions@edd-us.com> for more information on EDD or DEW/ISM software.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

EDD presents at 2017 IEEE PES General Meeting

At the 2017 IEEE PES General Meeting in Chicago, EDD’s Jason Bank was an invited speaker on the panel Advancing Distribution System Modelling Tools for PV Integration. His presentation, DEW-ISM Implementation at PEPCO: A Model and Data Driven Approach to Automating PV Interconnection Studies, covered results from an ongoing project at PEPCO to automate the analysis of PV interconnection studies.  The project at PEPCO starts with the construction of an Integrated System Model of the entire distribution and secondary system. The primary model has 2.4M components and the secondary model has 3.9M components.  The model is updated from GIS, hourly meter data and SCADA.  A production version of the model is maintained in memory to support a multitude of engineering analysis functions that run in the DEW software at very fast speeds on a small processor.  The DEW/ISM solution is integrated to the DER queue manager application to enable automatic analysis of DER interconnection requests.

 

View the presentation here  …  IEEE PES GM 2017 Pres jbank

 
Visit our website <www.edd-us.com> or contact us <solutions@edd-us.com> for more information on EDD or DEW/ISM software.

 

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

PEPCO Holdings uses DEW/ISM to Calculate DER Hosting Capacity

Pepco Holdings (PHI) has gone live with their DER Hosting Capacity website http://www.pepco.com/Hosting-Capacity-Map.aspx.  The site enables any stakeholder to view an interactive map to determine how much renewable energy and other distributed energy resources can be connected to the distribution system.  The Hosting Capacity is calculated using the DEW/ISM software from EDD, and the results are displayed on a geospatial interactive map.  The EDD Hosting Capacity algorithm is run against the Integrated System Model of PHI’s distribution system.  The ISM is part of EDD’s software solution.  The ISM is a geospatial power-flow model that includes PHI’s 1.9M metered customers with 8,760 hourly load models for each customer, 2,248 primary circuits, 356,000 distribution transformers with secondary conductors, 49 downtown networks, 338 substations and approximately 65,000 DER representing 731 MW’s.  The advantage of the EDD Hosting Capacity approach using the ISM model is that many thousands of power-flow runs are made so that a highly accurate estimate of hosting capacity can be provided.  For further information about EDD products and services, including Hosting Capacity analysis, please visit our website (www.edd-us.com) or contact us (solutions@edd-us.com) for a product demonstration.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Transmission, Substation and Distribution System Modeling: Millions of Components and Billions of Measurements

At a recent NREL seminar, EDD’s Chief Technical Officer, Dr. Robert Broadwater presented to NREL staff on the capabilities of the DEW/ISM software from EDD to model large Integrated System Models of utility electric grids.  The DEW/ISM software package is an advanced modeling and power flow analysis solution that is in commercial production at leading US utilities.

DEW/ISM is the only modeling software that employs the Graph Trace Analysis (GTA) approach.  GTA was developed at Virginia Tech to meet the needs of utilities to integrate large complex models with vast amounts of measurement data.

Technical advantages of GTA include: (1) eliminate processing of topology matrices; (2) solve Kirchhoff voltage & current law at every component in the model; (3) no simplification, the model accurately reflects field conditions; (4) readily supports distributed processing; (5) use the same techniques for transmission, substation, distribution in combined or separate models.

Business Advantages for utilities who use DEW/ISM include: (1) maintain an accurate physics-based and geospatial Integrated System Model of the entire system; (2) utilize AMI, SCADA and other measurements directly in power flow analysis; (3) readily accommodate all smart grid requirements for DER, storage, automation, microgrids, and voltage management; (4) automate engineering analysis for interconnection studies, hosting capacity, feeder efficiency and more; (5) cleanup GIS topology errors and support multiple modeling requirements from one accurate source.

Click here to view the presentation.

Visit our website <www.edd-us.com> or contact us <solutions@edd-us.com> for more information on EDD or DEW/ISM software.

facebooktwittergoogle_plusredditpinterestlinkedintumblrmail